Chapter1 Product Overview Dot Substitution (Supplemental Printing) Function The “Dot Substitution” function automatically supplements missing dots caused by clogged nozzles with dots generated by nozzles adjacent to the clogged nozzles. The number of nozzles that can be supplemented is up to 16 nozzles. However, if the clogged nozzles are located next to each other, the supplementation does not work well. If the number of clogged nozzles exceeds 16, supplementation for 16 nozzles is performed without stopping the printing operation. You cannot use this function if you have disabled the Nozzle Verification Technology function.
Enable the Nozzle Verification Technology function to use this function. • This function cannot perfectly supplement missing dots, so drop in print quality or barcode quality can occur even if this function is used. • Since the supplementation is performed according to information of clogged nozzles that has been acquired when starting printing, nozzles that get clogged during printing are not supplemented. How to Set Set using the operation panel of the printer, or using PrinterSetting. The factory default is “Enable”. See "Operation Panel Settings" on page 229 or "PrinterSetting (Windows)" on page 187 . 30