Safety Precautions To ensure safe use of the product, be sure to read this manual and the other instruction manuals supplied with the product before use. Store this manual in a safe place so that you can resolve any unclear points regarding the product at any time. Cautions on Installation Do not block the air vents of the product. ( "Rear" on page 21 ) Doing so can result in heat accumulated in the product causing a fire. Do not cover the product with a cloth or install it in a poorly-ventilated location. Furthermore, ensure there is the installation space specified in the manual.
WARNING • Do not install/store the product in an unstable location or in a location subject to vibration from other devices. The product may fall or collapse, causing breakage and possible injury. • Do not install the product in a location exposed to oily smoke or dust, or in a humid location. Doing so may cause electric shock or fire. • When lifting the product, perform the work with the correct posture. Lifting the product with an inappropriate posture may cause injury. • Because the product is heavy, do not attempt to carry the product by one person. When unpacking or moving the product, make sure to carry the product by at least two persons.
See below for details on the mass of this product. ( "Product Specifications" on page 359 ) • Do not install the product at a location exposed to strong light such as direct sun rays. Doing so may result in printing failure due to malfunction of the detectors. • If the printer has charged matte black ink and is more likely to be exposed to a temperature of -10 or lower degrees C (14°F), make sure to discharge ink before turning the printer off. Otherwise, the print head may be damaged due to freezing. ( "Transporting or Storing the Printer at -10°C (14°F) (With Matte Black Ink Installed)" on page 314 ) CAUTION 5