Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. 4 WARNING You must follow warnings carefully to avoid serious bodily injury. CAUTION Provides information that must be observed to prevent damage to the equipment or loss of data. • Possibility of sustaining physical injuries. • Possibility of causing physical damage. • Possibility of causing information loss. c IMPORTANT Indicates information with which you must comply when using the product. Mishandling due to ignoring this information may cause the product to fail or malfunction.
Q NOTE Indicates supplementary explanations and information you should know. • Possibility of causing information loss. c Indicates information with which you must comply when using the product. Mishandling due IMPORTANT to ignoring this information may cause the product to fail or malfunction. Q NOTE Indicates supplementary explanations and information you should know. Safety Precautions on Handling • Shut down your equipment immediately if it produces smoke, a strange odor, or unusual WARNING noise. Continued use may lead to fire or electric shock. Immediately unplug the equipment. • Only disassemble this product as described in this manual. Do not make modifications to the unit.
Tampering with this product may result in injury, fire, or electric shock. • Never insert or disconnect the power plug with wet hands. Doing so may result in severe shock. • Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may lead to fire or shock. • If water or other liquid spills into this equipment, unplug the power cord immediately. Con- tinued usage may lead to fire or shock. • Handle the power cord with care. Improper handling may lead to fire or shock. ∗ Do not modify or attempt to repair the cord. ∗ Do not place any object on top of the cord. ∗ Avoid excessive bending, twisting, and pulling. ∗ Do not place cord near heating equipment.
∗ Check that the plug is clean before plugging it in. ∗ Be sure to push the prongs all the way in. • Be sure to set this equipment on a firm, stable, horizontal surface. Product may break or cause injury if it falls. • Do not use in locations subject to high humidity or dust levels. Excessive humidity and dust may cause equipment damage, fire, or shock. • Do not place heavy objects on top of this product. Never stand or lean on this prod- uct.Equipment may fall or collapse, causing breakage and possible injury. WARNING • Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire or electric shock.
Immediately unplug the equipment. • Only disassemble this product as described in this manual. Do not make modifications to the unit. Tampering with this product may result in injury, fire, or electric shock. • Never insert or disconnect the power plug with wet hands. Doing so may result in severe shock. • Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may lead to fire or shock. • If water or other liquid spills into this equipment, unplug the power cord immediately. Con- tinued usage may lead to fire or shock. • Handle the power cord with care. Improper handling may lead to fire or shock. ∗ Do not modify or attempt to repair the cord.
∗ Do not place any object on top of the cord. ∗ Avoid excessive bending, twisting, and pulling. ∗ Do not place cord near heating equipment. ∗ Check that the plug is clean before plugging it in. ∗ Be sure to push the prongs all the way in. • Be sure to set this equipment on a firm, stable, horizontal surface. Product may break or cause injury if it falls. • Do not use in locations subject to high humidity or dust levels. Excessive humidity and dust may cause equipment damage, fire, or shock. • Do not place heavy objects on top of this product. Never stand or lean on this prod- uct.Equipment may fall or collapse, causing breakage and possible injury.