Chapter3 Handling How to Specify Barcode Data See the following descriptions to specify barcode data. About the composite symbol: Switching between CC-A and CC-B is automatically performed, however, to use CC-C, you need to specify to use it. (For GS1-128, the type of composite component can be selected from [No composite], [CC-A/CC-B], and [CC- C].) About HRI characters: If the length of the HRI characters becomes wider than entire width of the barcode, the length is regarded as the barcode width. UPC-A • Specify the barcode data with 11 digits. A check digit will be automatically added. UPC-E • Specify the barcode data with 10 digits.
5 digits are for a manufacturer code, and the rest of 5 digits are for a product code. JAN13(EAN) • Specify the barcode data with 12 digits. A check digit will be automatically added. JAN8(EAN) • Specify the barcode data with 7 digits. A check digit will be automatically added. Code39 • If both or either one of a start code or a stop code is not specified, they will be automatically added. ITF • If specified with an odd number of digits, “0” (zero) will be automatically added at the beginning of the digits. Codabar(NW7) • Do not include a start code and a stop code. The start code and stop code you specified on the printer driver will be added.
113 Composite component type Encodable number of digits CC-A 1 to 56 digits CC-B 1 to 338 digits CC-C 1 to 2361 digits