Chapter3 Handling • Settings for AztecCode ∗ Type: Select a type of AztecCode. ∗ Cell Size: Select a size of a cell (module) of AztecCode. For the recommended value, see "Recommended Module Values (p122)". ∗ Number of Layers: Specify the number of layers of AztecCode. ∗ Error Correction Area: Select any one of the following error correction area settings for AztecCode. This allows the symbol data to be correctly read even if a portion of the symbol is missing or damaged. The larger the number is, the higher the possibility of data restoration gets. [Auto]: the default is 23%+3 code words. [Specify a Percentage]: Enter a percentage of error correction area into the entry field.
• Settings for DataMatrix ∗ Symbol Shape: Select a shape of DataMatrix symbol. ∗ Error Correction Level: Specify an error correction level for DataMatrix. ∗ Cell Size: Select a size of a cell (module) of DataMatrix. For the recommended value, see "Recommended Module Values (p122)". ∗ Number of Vertical Cells: Specify the number of cells of DataMatrix in the vertical direction. Set this when you have selected [Rectangle] in the DataMatrix [Symbol Shape] setting. ∗ Number of Horizontal Cells: Specify the number of cells of DataMatrix in the horizontal direction. Set this when you have selected [Rectangle] in the DataMatrix [Symbol Shape] setting. [Minimize]:
The number of cells is automatically optimized and mini- mized. [Specify the Size]: The number of cells is set according to the selected size. 3 Click [Add]. The configured 2D symbol font is registered and added to the font list. • Up to 30 2D symbol fonts can be registered. • To edit settings of a registered 2D symbol font, select the font from the font list, change the settings and then click [Save]. • To delete a registered 2D symbol font, select the font from the font list, and then click [Delete]. 121