Chapter3 Handling Registering Fonts Click [Store...] in the [Font (Only .ttf and .tte)] field to display a screen to select a font. Specify the font file (TTF format) to be stored, and then click [Set]. The font file is sent to the printer and stored as a built-in font. Setting Character Code Table To print characters under the direct control of ESC/Label commands, you need to set character code table that corresponds to the character code you use. Select a character code in the [Stored data:] box in the [Character code table] field, and then click [Select].
If you have replaced from a ZPL II compatible monochrome printer, a character code that CW-C8000 Series do not support may be specified and the specified character code table may not be applied. In such case, select [Advanced settings] from the [Detailed settings] menus, then select [Fix character code table] in the [Replace settings from printer using ZPL II commands] window. For details, see "Replace Settings from Printer using ZPL II Commands" on page 211 .
197 Character code Target main country/language Character code table BIG5 Taiwan/Hong Kong/Macau BIG52K7.CNV EUC-CN Mainland China (Simplified Chinese) EUCCN199.CNV EUC-JP Japan EUCJP2K7.CNV KS X 1001(KS-C 5601-1987) Korea EUCKR2K6.CNV GB18030 Mainland China (Simplified Chinese) GB18030.CNV Shift-JIS Japan SJIS2K3.CNV