Chapter3 Handling Printer settings Allows you to configure the printer settings. 203 Item Description Preferences Power on action Select a printer action when the printer is powered on. Paper replacement action Select a printer action when paper is replaced. Head-Media Clearance Height Set the gap between the print head and the paper depending on the thickness of the paper to be printed. Notification settings Beeper volume Adjust the volume of the buzzer. Beep Notification Setting at An Error Continuous ringing Set whether to sound the buzzer when an error occurs. This setting is available when the [Beeper volume] setting is not [Off ].
Continuous ringing Select the check box to let the buzzer sound continuously when an error occurs. To stop the beep, press the (home) button or the (back) button on the operation panel. Error settings Reprint when error occurs Set whether or not to reprint when an error occurs. Incomplete Label Treatment Set whether or not to cut paper when unfinished labels are generated due to sudden stop of the printer in the middle of printing. Set time Set the date and time settings of the printer.