Chapter3 Handling Performing “Adjust Uneven Colors” c IMPORTANT When printing the uneven color adjustment pattern, load paper that has a print area of at least 50.0 mm {1.97 in.} wide and 25.0 mm {0.98 in.} long. If the paper size does not meet the requirements, an error message will be displayed and the adjustment pattern will not be printed. 1 Load the paper to be used for printing the adjustment pattern. 2 Set [Number of prints]. Refer to the table below to set the number of sheets to be printed. * The paper length is the sum of [Length] and [Gap Between Labels]. ( "Paper Specifications" on page 370 ) 3 Click [Adjustment]. 4 The uneven color adjustment pattern is printed.
Use the last printed adjustment pattern. Click [OK] on the screen that appears. 205 Number of prints Description Recommended The minimum number of sheets is set for printing the adjustment pattern on paper 300 mm {12 in.} or longer in length. 300 mm {12 in.} ≤ Paper length* × The minimum number of sheets Minimum The minimum number of sheets is set for printing adjustment pattern on paper between 125 mm {5 in.} and 300 mm {12 in.} in length. 125 mm {5 in.} ≤ Paper length* × The minimum number of sheets Specified number of sheets The number of sheets can be specified in the range that the adjustment pattern is printed on paper between 125 mm {5 in.} and 1016 mm {40 in.}.
125 mm {5 in.} ≤ Paper length* × [Specified number of sheets]