Chapter3 Handling Adjusting Detectors Sensitivity and Label Detection Thresholds The printer is equipped with two detectors; one detects leading edge of each label and another one detects black marks. If you have labels that cannot be detected by the printer, the labels may become detectable by changing sensitivity of the detectors and/or threshold for detecting labels. Change the settings using the operation panel. [Menu] - [Maintenance] - [Calibration] Simple Media Detect Allows you to adjust the threshold for detecting labels. Since this adjustment can be made in a short time, perform this adjustment first.
Media Detect Allows you to adjust the sensitivity of the detectors and the threshold for detecting labels. Perform this adjustment if your labels still cannot be detected after performing the [Simple Media Detect] adjustment. When using fanfold paper, flatten the perforations on the first through third sheets before loading the paper. Failure to flatten the perforations may result in incorrect adjustment. 293