Chapter4 Cleaning the Printer Cleaning the Exterior Turn off the printer, and then wipe off any dirt with a dry cloth or non-woven fabric that has been dampened. Make sure to unplug the printer when cleaning it. Do not use alcohol, benzine, thinner, trichloroethylene, or ketone based solvent for cleaning. Doing so may deform or damage the plastic and rubber parts. CAUTION Cleaning the Auto Cutter Watching the Video on How to Clean the Printer https://support.epson.net/p_doc/95e/ U “Cleaning the Printer (CW-C8000 Series)” If labels, paper dust, or adhesive has adhered to the fixed blade of the auto cutter, the blade may become dull. Clean the fixed blade following the procedure below.
1 If paper has been loaded, remove it. U "Removing Paper" on page 81 2 Turn the printer off and then disconnect the power cable from the outlet. 3 Using an alcohol-soaked cotton swab, remove labels, paper dust, and adhesive materials adhering to the fixed blade of the auto cutter from both ends toward the center, as shown in the figure below. 302