Chapter 1 Product Overview Perform Nozzle Verification when Detected Set whether to use the complementary printing function when nozzle clogging is detected. ( "Complementary Printing (Dot substitution) Function" on page 33 ) The factory default is “Enable”. How to Set Set using the operation panel of the printer, or using PrinterSetting. • Disable Complementary printing is not performed even if nozzle clogging is detected. • Enable If nozzle clogging is detected, complementary printing is performed using nozzles near the clogged nozzles. See "Operation Panel Settings" on page 223 or "PrinterSetting (Windows)" on page 185 .
Print Action when Detected Set whether to continue or stop printing when the number of clogged nozzles set in [Threshold of Clogged Nozzles] is exceeded. When nozzle clogging is detected, the printer will notify you of this on its screen. The factory default is “Continue Printing”. How to Set Set using the operation panel of the printer, or using PrinterSetting. • Pause Printing When the number of clogged nozzles exceeds the set number, the printer notifies you of that status and enters a print standby (pause) state. To resume printing, press the (pause) button. • Continue Printing When the number of clogged nozzles exceeds the set number, the printer notifies you but continues printing.
See "Operation Panel Settings" on page 223 or "PrinterSetting (Windows)" on page 185 . Default settings (Initializing nozzle check settings) You can restore the nozzle check settings to the state at the time of purchase (default value). How to Set Set using the operation panel of the printer, or using PrinterSetting. See "Operation Panel Settings" on page 223 or "PrinterSetting (Windows)" on page 185 . 32