Chapter6 Information for Application Development Changing Printer Settings and Replacing Printer Follow the flowchart below. Connect the printer to a computer that is used for making the settings ( Page 23 , Page 52 ) USB Interface Ethernet Interface Connect the printer and the computer with a USB cable Connect the printer to the network Setting the IP Address ( Page 51 ) Set the IP address of the printer to the address that has been set to the old printer using EpsonNet Config or operation panel of the printer.
Configure using PrinterSetting Configure the resolution of the printer and set to monochrome print mode ( Page 351 ) Change the resolution of the printer to the resolution of the ZPL II printer, and enable monochrome print mode. Register your background image ( Page 353 ) • Creating the image • Registering the image Register Fonts ( Page 355 ) • Obtain similar fonts • Register fonts and make replacement settings Adjust font width and object positioning ( Page 361 ) Print ( Page 364 ) • The background image is printed in color regardless of the monochrome print mode setting. • When adjusting, make the adjustment checking actual printouts. 350