Appendix Paper Shape/Form/Size Roll Continuous Paper / Roll Continuous Paper (Black Mark) Black mark center position Paper feed direction Paper Cut position Black mark Black mark length Black mark width Since the black mark detector is not located at the center position of the paper width, if there are black marks on both sides of the paper, black marks will be detected no matter which side of the paper you print from.
372 aper width B in lack mar terval Item Specifications Continuous Paper Continuous Paper (Black Mark) Paper Type Plain paper, Matte paper, Glossy paper Paper width 25.4 to 112 mm {1.00 to 4.41 in.} (Internal) 50 to 112 mm {1.97 to 4.41 in.} (Rear Feed) Black mark position - See the above figure Black mark width - 19 mm {0.75 in.} or more Black mark length - 4 to 25.4 mm {0.16 to 1.00 in.}, with 4 mm {0.16 in.} or more of space around the mark Black mark center position - 12.4 mm {0.49 in.} Black mark interval - 11 to 1016 mm {0.43 to 40.00 in.} Auto cut is not possible when the length of the paper is less than 15 mm {0.59 in.}.
Paper thickness 0.084 to 0.131 mm {0.003 to 0.005 in.} Roll paper core inner diameter 76.2 ± 0.5 mm {3.00 ± 0.02 in.} Roll core outer diameter 82.2 mm {3.24 in.} or more Roll paper outer diameter Up to 203.2 mm {8.00 in} Winding direction The side to be printed must face outward Holes and cutouts Paper with holes or cutouts cannot be used