Chapter2 Setup Configuring Network Settings Follow the procedure below to set up the IP address of the printer. 1 Select [Menu] on the home screen. 2 Select [General Settings] - [Network Settings] - [Advanced] - [TCP/IP]. 3 Select [Obtain IP Address] and then select [Auto] or [Manual]. When you select [Auto], the network setting is complete. When you select [Manual], proceed to step 4. 4 Enter the IP address and the subnet mask. Select a setting to change and then press the [OK] button to enter the information. 5 Select [Start Setup]. The network setting is now complete. 51