Paint treatment PAINT TREATMENT ΞΦ95 series 0 1.2 RESPRAYING/PAINT REPAIRING OF CAB TOP COAT AND SMC POLYESTER PARTS Respraying of cab top coat and SMC polyester parts 1. Remove any preserving agents, if applicable; see "General operations". 2. Remove any rust with a rust-removal agent. 3. Clean the area to be resprayed with a solvent. 3 4. Sand the section to be resprayed with 3M Scotch Brite ultra fine or an equivalent product. 5. Remove any dust from the sanded section with a Tack-rag cloth. 6. Clean the area to be resprayed with a solvent. 7. Apply primer to any bare patches. 8. Leave the primer to evaporate/dry. 9. Apply a filler, if necessary. 10. Leave the filler to evaporate/dry. 11.
Fine-sand with 3M Scotch Brite ultra fine or an equivalent product. 12. Remove any dust from the sanded section with a Tack-rag cloth. 13. Clean the area to be resprayed with a solvent. 14. Apply the top coat according to the manufacturer's instructions. 15. Leave the top coat to evaporate/dry. Observe the drying time as laid down in the manufacturer's instructions. © 200651 1-3