Bottom outlet P1P2 CAUTION • Keep the wiring away from the power wire so that electrical noise (external noise) is not received. • In order to prevent the entry of water or insects, use putty (field supply) to securely seal the wiring lead-in hole. Closing the controller 1 : Place the top of the controller on the top of the back plate. 2 : Snap the bottom of the controller into place on the bottom of the back plate. 3 : Ensure the installation site is dust‑free, before peeling the protective seal. 1 2 • Never touch the internal parts of the controller. • When closing the controller, be careful not to pinch the wiring.
• To prevent damage, make sure the front of the controller is clicked into the back plate securely. CAUTION 12