31 Manual setting mode - Installer setting - RC settings - RC settings Setback Main To prevent the room temperature from becoming extremely high or low while the air conditioner operation is turned off, if the room temperature exceeds the setback setpoint or falls below it, operation is set to start automatically. After all settings are complete, press the “Send to RC” button. example: setpoint range: 10 - 27°C heat/cool recovery differential: 1°C therefore heating setback temperature: and cooling setback temperature:
27°C+1°C=28°C heating setback temperature (10°C–1°C=9°C) cooling setback temperature (27°C+1°C=28°C) 9 28 5 35 27 10 example setpoint range available setpoint range (5 - 35°C) 0 5 10 15 20 25 30 35 40 °C