R/C Setting R/C setting method This section describes how to perform R/C setting. Refer to page 23 and enter the installer menu. Installer menu screen Press or button, move to “ If Bluetooth is connected, performing field setting from the remote controller side is impossible. Disconnect Bluetooth, or perform field setting from the mobile application. Sub-menu screen a Mode R 1 Unit Press or button, to select Mode No. and press to enter the field setting menu. a Mode No. b Unit No. b Sub-menu screen Press or button, to scroll to the desired Mode No. and press button. Mode R 3 Unit Sub-menu screen Mode R 3 Unit Press or button, to select “ ”, and then press button to set the selection. 31