DD-20(T) • Press the [TEMPO] switch. Confirm that the characters light up and go off in the sequence shown below. fig.2 • Press the [WRITE] switch. Confirm that the notes light up and go off in the sequence shown below. fig.3 • Press the [SELECT] switch. Confirm that the entire LCD is on and that all of the LEDs are lit. • Confirm that the LEDs go off in the following sequence, one each time the [SELECT] switch is pressed: “LCD backlighting” “4,” “3,” “2,” “1,” “MANUAL,” “TEMPO,” “MEMORY,” “TAP,” and “ON/OFF.” When “ON/OFF” goes off (all LEDs all unlit), press the [SELECT] switch to turn on all of the LEDs again.
• Press the FS-5U connected to the left channel of the stereo/monaural converter cable (PCS-31 or similar). Confirm that “C 1” appears in the display. • Press the FS-5U connected to the tight channel of the stereo/monaural converter cable (PCS-31 or similar). Confirm that “C 12” appears in the display. 17