Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC Using PID Control You set this parameter in the Initial Setting Level. The parameter is set to reverse operation by default. 1 Initial Setting Level ← orev (OREV): Indicates the Direct/Reverse Operation parameter. Press the (Mod e) Key several times to display orev (OREV). ← Default setting is or-r (OR-R): Direct operation or-r (OR-R): Reverse operation (default) or-d (OR-D): Direct operation Change the set value with the ( Up and Down) Keys. (When finished, press the (Level) Key for at least 1 second to return to the operation display.) Using PID Control Simplicity on the Worksite Solutions Guide for FAQs:
E5CC/E5EC 3-3 2 Setting direct or reverse operation. Change the parameter with the Ke y.