Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC Setting Temperature Alarms The procedure to set temperature alarms is given step by step in this section. How To Select an Alarm Type E5CC/E5EC Alarm Consider the following three points and select the alarm type from tables on page 4-3 and 4-4. 1. In what cases do you want to output an alarm? 2. Do you need to link the alarm temperature to the set point? Temperature sensor 3. Do you need an alarm when the power is turned ON. Select from the table on page 4-3. 1. ● Outputting an alarm when the temperature exceeds a specific value In what cases do you want to output an alarm?
Upper-limit Alarm ON → Upper-limit Alarm OFF ● Outputting an alarm when the temperature goes below a specific value → Lower-limit Alarm Setting Temperature Alarms Lower-limit Alarm OFF ON ● Outputting an alarm when the temperature goes below a specific value or exceeds a specific value Upper-limit Alarm ON → Upper-limit and Lower-limit Alarm Lower-limit Alarm OFF ON ● Outputting an alarm when the temperature is within a specific range → Upper-limit and Lower-limit Range Alarm Upper-limit and Lower-limit Range Alarm OFF OFF ON Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC 4-1 S tep 1 Determining the Alarm Set Value 1 Selecting the Alarm Type