Part Names See Illustration A . Note on Power-on This product does not have a power supply switch. It automatically turns on when the TM-T88V-DT/TM-T88VI-DT2 is started. Changing the Orientation and Angle of the Display Unit Hold the base of the customer display with your hand and move the display or L-shaped pole to change the direction or angle. Make sure to move them gently in the mobile range only. Moving with force may cause damages to the display unit. See Illustration B for the L-shaped pole model and Illustration C for the straight pole model. DIP Switch The DIP switch configures the communication settings and whether a self-test is required. See Illustration D . CAUTION:
Turn off the TM-T88V-DT/TM-T88VI-DT2 before you start setting the DIP switch. Do not allow foreign objects to fall into the DIP switch. Setting the DIP switch with the TM-T88V-DT/TM-T88VI-DT2 power ON or foreign objects inside the DIP switch may damage the product. Functions of DIP Switch 1 (*1) Executes the self-test once only when the power is turned on. 6 DM-D110 USB Interface for TM-T88V-DT/TM-T88VI-DT2 DSW1 no.
Functions ON OFF Default Setting 1-1 Data reception errors Ignore Display “?” OFF 1-2 Data Length 7 bits 8 bits OFF 1-3 Parity check With Parity No Parity OFF 1-4 Parity Selection Even Odd OFF 1-5 Switching transfer speed See “Transfer Speed Switching.” ON 1-6 OFF 1-7 ON 1-8 Self-Test execution (*1) Execute Do not execute OFF 1-9 Internal use. Do not change. Fixed to OFF. 1-10