Техническая документация DM Датчиков (EN)

Technical Reference Guide Product Overview Describes features and general specifications for this product. Setup Describes how to install and set this product. Handling Describes the basic usage of this product. Application Development Information Describes how to control this product and information necessary for developing applications. Appendix Describes the specifications of the product, connectors, and serial cables, as well as the character code table. M00035605 Rev. F

Стр. 1

Cautions • No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permis- sion of Seiko Epson Corporation. • The contents of this document are subject to change without notice. Please contact us for the latest informa- tion. • While every precaution has been taken in the preparation of this document, Seiko Epson Corporation assumes no responsibility for errors or omissions. • Neither is any liability assumed for damages resulting from the use of the information contained herein.

• Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third par- ties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

• Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those specified as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Trademarks Microsoft® and Windows® are either registered trademarks of Microsoft Corporation in the United States and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Android™ is a trademark of Google LLC. All other trademarks are the property of their respective owners and used for identification purpose only.

ESC/POS Proprietary Command System Epson took the initiative by introducing ESC/POS, a proprietary POS printer command system, which includes patented or patent pending commands and enables versatile POS system construction with high scalability. Compatible with all types of Epson POS printers and displays, this proprietary control system also offers the flexibility to easily make future upgrades. Its popularity is worldwide. ESC/POS is designed to reduce the processing load on the host computer in POS environments. It comprises a set of highly functional and efficient commands that enables the full realization of the potential of printers. ©Seiko Epson Corporation 2006–2024 2

Стр. 2

Key to Symbols

For Safety Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. You must follow warnings carefully to avoid serious bodily injury. WARNING Provides information that must be observed to prevent damage to the equipment or loss of data. • Possibility of sustaining physical injuries. • Possibility of causing physical damage. • Possibility of causing information loss. CAUTION Provides information that must be observed to avoid damage to your equipment or a malfunction. Provides important information and useful tips. 3

Стр. 3

Cautions

Warnings • To avoid risk of electric shock, do not set up this product or handle cables during a thun- derstorm. • Never insert or disconnect the power plug with wet hands. Doing so may result in severe shock. • Handle the power cable with care. Improper handling may lead to fire or electric shock. ∗ Do not modify or attempt to repair the cable. ∗ Do not place any heavy object on top of the cable. ∗ Avoid excessive bending, twisting, and pulling. WARNING • Be sure to set this equipment on a firm, stable, horizontal surface. The product may break or cause injury if it falls. • Do not place heavy objects on top of this product. Never stand or lean on this product.

Equipment may fall or collapse, causing breakage and possible injury. • To ensure safety, unplug this product before leaving it unused for an extended period. • Do not drop this product because you may damage the built-in vacuum fluorescent dis- play. • Using in the presence of silicon gas (silicon adhesive, silicon oil, silicon powder, etc.) including siloxane and of malignant gas (nitric acid, hydrosulfuric, ammonia, chlorine, etc.) may cause contact failure at contact points in a mechanical switch, etc., in a short time because of adhesion or oxidization of the insulation film. CAUTION 4 ∗ Do not place the cable near heating equipment. ∗ Check that the plug is clean before plugging it in.

∗ Be sure to push the plug all the way in. • Be sure to use the specified power source. Connection to an improper power source may cause fire or shock. • Do not place multiple loads on the power outlet. Overloading the outlet may lead to fire or shock. • Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment and contact qualified ser- vice personnel for advice. • Never attempt to repair this product yourself. Improper repair work can be dangerous. • Never disassemble or modify this product. Tampering with this product may result in injury or fire.

• Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may lead to fire. • If water or other liquid spills into this equipment, do not continue to use it. Continued use may lead to fire. Unplug the power cord immediately and contact qualified ser- vice personnel for advice. • Do not use aerosol sprayers containing flammable gas inside or around this product. Doing so may cause fire. • Do not connect cables in ways other than those mentioned in this manual. Different connections may cause equipment damage or fire. • Do not use this product in locations subject to high humidity or dust levels. Excessive humidity and dust may cause equipment damage or fire.

Cautions

Стр. 4