Indoor temperature sensor Indoor temper atur e sensor 4.3-31 Removal and refitting of indoor temperature sensor 1- Protection Place protective pads at following positions: • Front fender; • Front bumper; • Driver’s seat; • Carpet (on driver's side); • Steering wheel; • Parking brake lever; • Shift lever. 2 - Removal • Turn off the ignition switch, and disconnect the battery negative cable. • Remove the fuse box cover in the passenger compartment and remove the fixing screws (1) of instrument panel left lower protective plate with a Phillips screwdriver. • Remove the instrument panel left protective plate (2).
• Remove the fixing bolts (1) of the charging hole cover handle and the drive motor compartment handle with a Phillips screwdriver.