Replacement Model Selection DOP-100 Series Transition Manual 1.1 Corresponding replacement models The DOP-100 series models support conversion from the DOP-B series models, as shown in the 1 following table. When you use a DOP-100 series model to open a project file of the corresponding DOP-B series model, the software automatically converts it to the DOP-100 series model project. For example, if you use DOPSoft 4.0 to open a project file edited on DOP-B03S210, it automatically converts the project file to that of the corresponding model DOP-103BQ.
Compatible models indicate that the DOP-100 series models are the same as the DOP-B series models in terms of the mounting dimensions and number of COM ports. Partially compatible models indicate that the mounting dimensions are the same, but the number of COM ports is different *1 , so you need to note the number of COM ports when selecting the suitable model for transition. Incompatible models indicate that there is currently no corresponding model for transition, and the compatible models will be released in Q2 2019. Note: 1. In the partially compatible models, the DOP-B series has three physical COM ports, while the DOP-100 series has two physical COM ports.
The replacement model DOP-107IV (coming soon) for DOP-B07S415 and DOP-B07E415 has three physical COM ports. 1-2 February, 2019 Compatible models Partially compatible models Incompatible models* DOP-B series DOP-100 series DOP-B series DOP-100 series DOP-B series DOP-B03S210 DOP-B03S211 DOP-103BQ DOP-B07S415* DOP-B07S411K DOP-B07S401K DOP-B07PS415 DOP-107CV DOP-B05S111 DOP-B03E211 DOP-103WQ DOP-B07E415* DOP-107EV DOP-B08S515 DOP-B08E515 DOP-B07SS411 DOP-B07S410 DOP-107BV DOP-B07S515 DOP-B07PS515 DOP-107EG DOP-B10S615 DOP-B10E615 DOP-B10S511 DOP-B10E515 DOP-B07S411 DOP-107CV DOP-B10S411 DOP-110CS *Compatible models will be released in mid-2019.
DOP-B07E411 DOP-107EV *The replacement model DOP-107IV for DOP-B07S415 and DOP-B07E415 is coming soon. DOP-B07E515 DOP-107EG