Downloaded from https://www.everyspec.com MIL-STD-2031(SH) APPENDIX G TEST RE1}ORTS TECI lNICAL CONTENT REQUIREMENTS I 0. SCO1’E 10.1 Scope, This appendix covers information that shall be included in the test reports when specified in the contract or order. This appendix is mandatoty only when data item description DI- MISC-80653 is cited on the DD Form 1423. 20. APPLICABLE DOCUMENTS This section is not applicable to this appendix. 30. TEST REPORTS 30,1 (Oxygen-tempemture LOI) standord operating procedure for oxygewtempemture index profile. 30.1.1 Source. Name and address of the ksiing laboratory and date of test. 30.1.2 Nomenclature.
Noun name, chemical name, manufacturer, and code designations. 30.13 Dimensions. Length, width, and thickness in inches 30.1.4 IhperimeWtI COndi!iOn& Humidity, room experimental conditions. temperatur~ time period specimen at 30.1.5 Profile. Tabular results and graphic rcpresentaticms of the temperature index profile at 25 (ambient), 75 and 300 (75, 165, and 570 and other temperatures as appropriate. Include results from each specimen test. 30.1.6 Behavior. Descriptions of any unusual specimen behavior such as prolonged glow”ng combustion after flameout, charring, sparking or dripping, bending, erratic burning, or excessive smoke evolution.
30.2 (Flame Spread) swfnee flnmmnbility of mnterials using a mdittnt heat energy source. 30.2.1 Same. Name and address of the testing laboratory and date of test. Nomenclature. Noun nrtme, chemical nnme, manufact urcr, and code designations. 30.2.2 30.23 Dimensions. Length, width, and thickness in inches, 48