Downloaded from https://www.everyspec.com MIL-STD-3001-4(AS) b. Parts that require mandatory replacement (e.g., preformed packing) in the procedure shall be listed. c. An appropriate notation shall follow the item to explain each restriction and/or quantity requirement. 5.2.2.6 Additional work package information ( ETMs and IETMs only ). In addition to the work package information required in 5.2.2, additional information about the contents of the work package shall be included for each work package, The following types of information should be included, as applicable: a. Maintenance level. b. Effectivity. c. Personnel required. d. Required conditions/system preparation checklist. e.
Special environmental conditions. f. General safety instruction. 5.3 Required maintenance information with IPB. Maintenance information with IPB data shall be developed and divided into the following types of work packages. All work packages described in 5.3.1 through 5.3.9 may have an introduction . a. Maintenance work packages. b. General maintenance procedures work package. c. Servicing work package. d. Ground operations work package. e. Support equipment maintenance work package. f. Local manufacturing and assembly work package. g. Power plant build-up work packages. h. Preinduction and mandatory inspection work package. i. External tubing, cabling and clamping work packages. j.
Separate IPB work packages. k. Wiring/cabling diagram work packages. l. Wire run lists work packages. 6