US Army Materiel Command AMCP 706-250 — AMCP 706-250 Guns—General Engineering Design Handbook (1964) PDF (EN)

Downloaded from https://www.everyspec.com CHAPTER 2 CLASSIFICATION AND DESCRIPTION BY MILITARY CHARACTERISTICS OR USAGE » * 2-1 General 2-2.1.1 Gun (Specific) There are many ways in which guns are classified. The moat generally used method is that of classify- ing according to military characteristics or military usage. This involves sizes or shapes which are readily apparent to the eye and with which most military personnel are familiar. Because of dif- fering general and specific meanings for the terms "gun" and "cannon," the reader should give spe- cial attention to the understanding of these terms in both senses.

In the specific sense used in ordnance supply, a gun is a complete weapon conforming to the general cannon definition; including the attached or closely ' related units necessary for operation as intended (recoil mechanism, mount, sighting system, acces- sories, but not ammunition), and designed for per- formance characterised primarily by relatively long range, high velocity, and relatively little cur- vature of the projectile trajectory within the in- tended range (see Figures 2-1 and 2-2).

2-2 Gun (General) 2-2.1.2 Mortar For the purposes of this handbook, a gun is a projectile-throwing device, consisting essentially of a projectile-guiding tube with an incorporate or connected reaction chamber, in which the chemical energy of a propellant is rapidly converted into heat and the hot gases produced expand to expel the projectile at a high velocity (kinetic energy). Guns in this general sense are separated, according to sire and use, into the general categories of can- non and small arms. Launchers for rockets and missiles are purposely excluded from consideration in this handbook.

A mortar is a complete weapon conforming to the general cannon definition; including the at- tached or closely related units necessary for opera- tion as intended (mount, sighting system, and accessories, but not ammunition), and designed for performance characterized primarily by relatively low velocity, short range, and a highly arched pro- jectile trajectory at the ranges at which it is de- signed to fire (see Figures 2-3 and 2-4).

2-21.3 Howitzer A howitzer is a complete weapon conforming to the general cannon definition; including the at- A cannon is a weapon conforming to the general gun definition, that is provided with a structure (mount) for mechanical support during firing, and that has a bore diameter exceeding the limit as- signed to small arms. (The small arms bore limit is presently administratively set at 30mm.) The general category of cannon is further divided, in accordance with ballistic characteristics and use, into guns, howitzers, mortars, and recoilless weap- ons, as follows: 2-2.1 Cannon (General) Figun 2-1. Typical Gun (Se/f-Prope/W Mount)