Downloaded from https://www.everyspec.com ammunition is used where size and weight of the components precludes use of a fixed round. For breech loading, the closure must open for insertion of the ammunition components, and provide a gas- tight seal when closed. Necessity for removal of a large metallic cartridge case is obviated, but provision must be made for insertion and support of the primer, and removal of its case after firing. 3-4 Classification by Shape of Bore Guns may be classified according to the shape of the bore, as (a) cylindrical bore or (b) tapered bore (including squeeze and choke bores). Most military guns fall into the first category. Figure 3-5.
Typical Separated Artillery Ammunition quirements are essentially similar to those for fixed ammunition. 3-3.4 Separate Loading Ammunition (see Figure 3-6) This term denotes ammunition of which each round consists of a projectile, propellant in one or more bags, and a small metal-cased primer, all separately inserted into the gun. This type of 3-4.1 Cylindrical Bore This classification includes those bores of basi- cally circular cross section having the same size at all cross sections from the chamber to the muzzle. (The size and contour of the chamber are not con- sidered.) Longitudinal grooves for control of pro- jectile rotation are disregarded; hence, the cylin- »APO 112782 Figure 3-6.
Typical Separate Loading Artillery Ammunition [Primer Not Shown)