TABLE OF CONTENTS (continued) Paragraph Page 4-4.2 Details of Contour and Function 4-4 4-4.2.1 Forcing Cone 4-4 4-4.2.2 Bullet Seat 4-4 4-4.2.3 Band Cylinder 4-4 4-4.2.4 Case Clearance Shoulder 4-5 4-4.2.5 Band Rear Slope 4-5 4-4.2.6 Centering Slope 4-5 4-4.2.7 Chamber Front Slope 4-5 Downloaded from https://www.everyspec.com 5-1 General Considerations 5-1 5-2 Propellant Compositions and Characteristics 5-1 5-2.1 Composition 5-1 5-2.2 Total Energy 5-1 5-2.3 Burning Rate and Pressure 5-2 5-2.4 Stability 5-2 5-2.5 Mechanical Properties 5-2 5-2.6 Feasibility of Manufacture 5-2 5-2.7 Costs 5-2 CHAPTER 5 INTER-RELATION WITH PROPELLANTS 5-3 Granulation 5-4 5-3.1 Purpose 5-4 5-3.2 Effect of Grain Form 5-4 5-3.3 Effect of Web Thickness 5-4 5-4 Form of Charge 5-5 5-4.1 Cased Charges 5 -5 5-4.2 Noncased Charges 5-5 5-5 Ignition Systems 5-6 5-5.1 General 5-6 5-5.2 Relation Between Tgnition and Muzzle Velocity 5-6 5-5.3 Pressure Waves 5-6 5-5.4 Primers and Igniters 5-6 5-5.4.1 Voids 5-7 5-5.4.2 Ignition As a Factor in Design 5-7 5-6 Smoke and Flash 5-7 5-6.1 Causes 5-7 5-6.2 Disadvantages 5-7 5-6.3 Correlation With Grain, Form, Charge and Tube Design .
. 5-7 5-6.4 Elimination of Flash and Smoke 5-8 5-6.4.1 Flash 5-8 5-6.4.2 Smoke 5-8 5-7 Fitting the Propellant and the Gun 5-9 5-7.1 General Considerations 5-9 5-7.2 General Procedure 5-9 5-7.3 Estimation of Weight and Granulation of the Charge 5-9 5-7.4 Correlation With Chamber Design 5-10 v