— AMCP 706-286 — Engineering Design Handbook (1963) (EN)

Downloaded from https://www.everyspec.com DESIGN CONSIDIERATIONS of a material of inconsistent physical prop- missiles than it is in the design of manned erties. The scatter of tests about the sample flight vehicles. In ballistic missile design the mean or median of a strength characteristic physical safety of flight personnel need not I would dictate a lower design allowable, and be considered. Thus the structural designer hence a larger cross-sectional area for a can keep safety factors at a minimum, espe- given applied stress.

In a preliminary design ciaily for well-established design conditions evaluation this may well lead to the struc- and for secondary structures, when he can f tural designei" to choose a material of more choose a structural material without the consistent physical properties. necessity of considering the potential loss of life. The possibility of structural failure near the launching platform, however, does 4-7.5. Safety. The philosophy of design involve physical safety of personnel, and for safety is somewhat different in ballistic cannot be overlooked. 4-0. RFERENCES AND 21BL1OGRAPHW November 1957. 1. Ramo, S., "ICBM: Giant Step into Space," 6. Bonney, E.

A., et al, Aerodynamics, Pro- Astronautics, Vol. 2, No. 1, pp. 34-41, Intivion, Structures, Vol. 2, Principles of August 1957. Guided Missile Design Series, D. Van 2. Dukes, W. H., and Schwitt, A. (ed.), Nostrand Co., Inc., Princeton, N.J., 1956. "Structural Design for Aerodynamic 7. Cox, Donald D, "Selecting Structural ) Heating." Part I-Design Information Materials for Supersonic Flight," Aero- (Confidential). Part 11-Analytical nautical Engineering Review, Vol. 17, Studies (Confirential). Part III-Strue- No. 1, pp. 28-31, January 1958. tural Design (Sezret), Wright Air De- 8. Hoff, N.

J., "The Structural Effects of velopment Center, WADC TR 55-305, Aerodynamic Heating," Proceelings of October 1955. the Third General Assembly of the Ad- 3. Strength of Aircraft Metal Elements, visory Group for Aeronautical Research March 1955 ei., Air Materiel Command- and Development, NATO, London, Eng- 5 Builletin, Government Printing Office, land, p. 47, 1953. , Washiagton, D. C. 9. Hod, N. J., "Structural Problems of 4.

Goldin, Robert, "Thermal Creep Design Future Aircraft," Proceedings of the Criteria," paper presented to Institute Third Anglo-American Aeronautical of Aeronavuical Science National Sum- Conference, The Royal Aeronautical mer Mee-,ng, Los Angeles, California, Society, Loadon, England, p. 77, 1951. Reprint No. '730, July 1957. 10. Hoff, N. J., "The Thermal Barrier- 5. Batdori, Samuel B., "Structural Prob- Structures," Transactions of the Amei- lems in Hypersonic Flight," Jet Propul- ca? Society of Mechanical Engineers, sion, Vy5. 27,, No. II, pp. 1157-1161, Vol. 77, No. 5, p. 759, July 1955. 7 ii t " 73