US Army Materiel Command AMCP 706-117 — Environmental Series, Part Three: Induced Environmental Factors (EN)

Downloaded from https://www.everyspec.com AMet 701-117 oxide and ozone as deribed In par. 24.1(6) (see Fig. operation performance varied from I to 8 days. Also, 2.25) Is capable of measurng nitric oxide and total operational data such as calibration drift, sensitivity, nitrogen oxides (i.e., nitrogen dioxide reduced catalyti- interferences, and operating range vary between instru- caly to nitric oxide and total nitrogen oxide, and mess. ments as well as between detection principles. With ured with nitric oxide to give total nitrogen oxides). these differences in instrument performance, the im- "Nitrogen dioxide is then determined by taking the differ.

portance of studying the results of evaluation teats, once between the two values. This chemiluminoscent when they exist, before selecting an instrument is method will probably replace the Jacobs-Hochheher readily seen. method as the reference method for monitoring nitrogen A more recent field evaluation of ambient air moni- dioxide.

toting Instruments Involved Instruments for measuring sulfur dioxide, ozone, oxidants, nitric oxide, nitrogen 2-6.4 INSTRUMENTATION dioxide, hydrogen sulfide, methane, carbon monoxide, commercially available, the selection of a parUcular Them instruments are identified by manufacturer and With the greet number of monitoring Instruments total hydrocarbon, ethylene, and acetylene (Ref. 89). instrument for specific applications can be difficult. detection principle in Table 2-18.

For this evaluaion rder to select the most appropriate analyzer, the user program the instruments were placed in a mobile odmust know the operational characteristica for each laboratory and operated for a 3-mo period in Los An. instrument. Sogiated performance specifliations for e gles, followed by a 6-mo period in St. Louis. Approxi- mately 30 instruments were included in the evaluation. automatic monitors for sulfur dioxide, carbon mon- Operational type data on some of the instruments tested oxide, photochemical oxidants, nitrogen dioxide, and artional the ta These ots shouments tesed nonmethane hydrocarbons are liven in Table 2.19 (Ref. are given in the table.

These data should be represen- no). Siceanllohythespecifications may not be required tative of what can be achieved by field monitoring in. 33). Since all of O sstruments insofar as sensitivity, range, and calibration in all monitoring situations, the user must select the ones drift are concerned. An Indication of the price range for important to his application. The specifications shown each instrument Is induded. Calibration data for the test an realistic and can be met by instrument that are period were used to determine a single linear regression currently available, estimate of the calibration curve for each Instrument. (1) Pollutant monitoP--gases.

A great number of The correlation coefficient as listed in column 9 of Table companies mra.ufacture air pollution measuring instru- 2-18 can be used as an Indication of the long-term sta. ments. For example, in preparation for an evaluation bility of that instrument. The higher tie value, the study of sulfur dioxide instruments, a survey in April greater the stability. Instruments having correlation of 1967 showed that 16 monitors were commercially coefficients greater than about 0.990 show very little available (Ref. 37). Undoubtedly, many more are now drift between calibrations while values below about 0.95 on the market. Many of these instruments have not show considerable drift.

been collaboratively tested and, even if test data were (2) Pollutant monitor3--particulates Commercial available, modifications and new techniques being in- equipment for measuring suspended particulate matter troduced continually make it imperative that the very is given in Table 2-20. Evaluation data were not avails- latest performance data be evaluated before purchasing ble on any of these instruments. The list is not all an instrument, inclusive and the omission of any manufacturer of this Operational data on many of the sulfur dioxide in- type equipment is not intentional. struments can be gained from a laboratory and field evaluation conducted by Rhodes, et at. (Refs. 37,38).

2-7 EFFECTS OF ATMOSPHERIC Twelve sulfur dioxide instruments using coulometry, POLLUTANTS ON MATERIALS conductivity, and colorimetry detection methods were evaluated from September 1967 through February 1968. A majority of the data on the effects of air pollutants A comparison of the different instruments showed that on materials has been derived from outside exposure correlation coefficients ranged from a maximum of studies. For example, most data on metals show the 0.96 to a minimum of 0.40. Downtime varied from 0.0 rate of corrosion associated with the general types of to 30.3 percent of total operating time; total estimated atmospheres such as marine, rural, and industrial.

In monthly cost of reagents, electrical power, and chart most cases time-varying mixtures of several pollutants paper ranged from $6.00 to $21.00; and unattended were present, making it difficult to ascertain the effects 2-60