Downloaded from https://www.everyspec.com MIL-HDBK-502: A MIL-HDBK-502: A CQUISITION CQUISITION L OGISTICS OGISTICS 7.3.4 Support and Test Equipment Purpose and Content These reports provide data necessary to register, or verify the registry of, the support or test equipment in the government’s inventory. They may provide technical parameters, give details of the test measurement and diagnostic equipment (TMDE) calibration procedures, and list any piece of Category III support equipment needed to maintain the required system’s support equipment. The information contained within these summaries is normally associated with the reference number and CAGE of the support equipment.
Figure 7- 4 presents a sample summary layout. SUPPORT AND TEST EQUIPMENT SUMMARY SECTION I - TECHNICAL DESCRIPTION SE Reference Number CAGE Item Name 5D43-139-A 10855 Compressor, Ring Description And Function Of Support Equipment: A band type sleeve with a mechanical leverage mechanism to facilitate easy reduction of ring radii.
Depth Width Height UM Weight UM 4.0 5.0 5.0 In 3.5 Lb Skill Specialty TMDE RAM Characteristics NSN and Related Data Unit Cost Code For SE MTBF MTTR Cal Time 52C20 300 hrs 50 hrs 1 min 5820-003478650 75.75 SECTION II - Unit Under Test Requirements Characteristics Measured/Stimulus Required Supported Item I/O Parameter Range Range IPC Name From To 005 Internal Compressor Diameter In. 32 45 Diameter 32 42 Figure 7-4. Sample Support and Test Equipment Summary 7-11