Downloaded from https://www.everyspec.com MIL-HDBK-502: A MIL-HDBK-502: A CQUISITION CQUISITION L OGISTICS OGISTICS data products. If data located in Appendix B of the LMI specification is wanted in a summary, Worksheet 1 contains a place where that data is to be identified. If data not contained in Appendix B is specified as part of one of these summaries, a definition and format for that data must be provided in the contract. Worksheet 1 provides a place for such data. The definition and format for a data product may have been identified in another document (commercial or military). If so, that document should be referenced for the appropriate definition and format.
Furthermore, the systems engineering area utilizing the given document should be contacted to ensure that the same data is not already being bought. The last part of Worksheet 1 can be used to identify whether a government provided layout for the summary will be used, or whether contractor format is acceptable. If the Government Provided block is checked, a specific summary layout must be provided, either as an attachment to Worksheet 1 or by some other method that can be put in the contract.
Remember, however, that although the government may dictate a specific layout for a report, allowing the contractor to propose a layout containing the necessary information and then modifying that layout as necessary is likely to be a more cost effective approach. Following are two examples for using Worksheet 1 to obtain LMI Maintenance Planning summaries. The first example (Figure 7-10) is a simplified example that relies on the contractor to develop the layout (see Figure 7-2 for a possible summary view). The second example (Figure 7- 11, Part 1 and Part 2) is more complicated. It reveals the information that is necessary if the summary layout is to be provided by the government.
Note that this example shows that the more complex a summary request is, the more work is required of the requiring authority. 7-19