For example, :SYSTemCOMMunicate: LAN: MAC? *The query returns 00-11-22-33-44-55*/ SYSTem: COMMunicate : [:STATe] For example, :SYSTemCOMMunicate: LAN: STATe ON /*Enable manual IP mode*/ :SYSTem: COMMunicate: LAN: STATe? /*The query returns ON*/ :SYSTem:COMMunicate: :RX ? SYSTem:COMMunicate: :TX ? SYSTem:COMMunicate:WLAN:HOTPot[:STATe] 59 / 136 Parameter Name Type Range Default Discrete {WLAN|LAN} LAN Description The machine needs to be equipped with LAN when setting up the LAN The machine needs to be equipped with WLAN when setting up WLAN Return format Return MAC address Command format SYSTem:COMMunicate: : SYSTem:COMMunicate: ? Function description Turn the network card on or off.
Query the network card status. Parameter Name Type Range Default Discrete {WLAN|LAN} LAN Bool {OFF|ON} ON Description The machine needs to be equipped with LAN when setting up the LAN The machine needs to be equipped with WLAN when setting up WLAN Return format Returns ON or OFF Command format SYSTem:COMMunicate: :RX ? Function description Query the total received data of the network card. Parameter Name Type Range Default Discrete {WLAN|LAN} LAN Description The machine needs to be equipped with LAN when setting up the LAN The machine needs to be equipped with WLAN when setting up WLAN Return format Returns the cumulative received data, the unit is Byte Command format SYSTem:COMMunicate:
LAN:TX ? Function description Query the total amount of data sent by the network card. Parameter Name Type Range Default Discrete {WLAN|LAN} LAN Description The machine needs to be equipped with LAN when setting up the LAN The machine needs to be equipped with WLAN when setting up WLAN Return format Returns cumulative sent data, unit is Byte Command format :SYSTem:COMMunicate:WLAN:HOTPot : STATe :SYSTem:COMMunicate:WLAN:HOTPot : STATe ?