For example, SYSTem: COMMunicate: WLAN: NETWork: ADD "hello", "123456" /*Add hotspot "hello", password "123456", add to wifi list*/ SYSTem:COMMunicate:WLAN:NETWork:ENABle For example, SYSTem: COMMunicate: WLAN: NETWork: ENABle "hello" /*command will connect hotspot "hello"*/ SYSTem: COMMunicate: WLAN: NETWork: DISAble For example, SYSTem: COMMunicate: WLAN: NETWork: DISAble "hello" /*will disconnect hotspot "hello"*/ SYSTem: COMMunicate: WLAN: NETWork: REMOve For example SYSTem: COMMunicate: WLAN: NETWork:
REMOve "hello" /*will remove hotspot "hello" from the wifi list saved by the system*/ :TIMebase Command Subsystem :TIMebase command is used to set the horizontal system, such as turning on delayed scan, setting the horizontal time base mode, etc.
63 / 136 Description The machine needs to be equipped with WLAN when setting up WLAN Return format Returns 0 for success, others fail Command format SYSTem:COMMunicate:WLAN:NETWork:ENABle Function description Connect to the wifi hotspot named ssid Parameter Name Type Range Default ASCII chars Less than 128 -- Description The machine needs to be equipped with WLAN when setting up WLAN Return format Returns 0 for success, others fail Command format SYSTem:COMMunicate:WLAN:NETWork:DISAble Function description Disconnect the wifi hotspot named ssid Parameter Name Type Range Default ASCII chars Less than 128 -- Description The machine needs to be equipped with WLAN when setting up WLAN Return format Returns 0 for success, others fail Command format SYSTem:COMMunicate:WLAN:NETWork:REMOve Function description The hotspot will be removed from the wifi list saved by the system Parameter Name Type Range Default ASCII chars Less than 128 -- Description The machine needs to be equipped with WLAN when setting up WLAN Return format Returns 0 for success, others fail