:TRIGger:PULSe:WHEN NLESs /*Set trigger condition to NLESs*/ :TRIGger:PULSe:WHEN? /*The query returns NELS*/ :TRIGger: PULSe: WIDTh For example, :TRIGger:PULSe:WIDTh 0.000003 /*Set the pulse width value to 3μs*/ :TRIGger:PULSe:WIDTh? /*The query returns 3.000000e-06*/ :TRIGger:PULSe:LEVel1 For example, :TRIGger:PULSe: LEVel 0.16 /*Set the trigger level to 160mV*/ :TRIGger:PULSe: LEVel? /*The query returns 1.600000e-01*/ :TRIGger:SLOPe :TRIGger:SLOPe:SOURce For example, :TRIGger:SLOPe:SOURce CHANnel2 /*Set trigger source to CH2*/ :TRIGger:SLOPe:SOURce? /*The query returns CHAN2*/ 71 / 136 Command format :TRIGger:PULSe:WIDTh :TRIGger:PULSe:WIDTh?
Function description Set or query the pulse width triggering time. The default unit is s. Parameter Name Type Range Default Integer 8ns to 10s 20ns Description This command applies to trigger conditions. Return format The query returns the pulse width value in scientific notation. Command format :TRIGger:PULSe:LEVel :TRIGger:PULSe:LEVel? Function description Set or query the trigger level when pulse width trigger, the unit is the same as the current amplitude unit. Parameter Name Type Range Default Integer (-5 × VerticalScale - OFFSet)至 (5 × VerticalScale - OFFSet) 0 Description This setting command is valid only when the selected source is an analog channel.
Return format The query returns the trigger level value in scientific notation. Command format :TRIGger:SLOPe:SOURce :TRIGger:SLOPe:SOURce? Function description Set or query the trigger source of slope trigger Parameter Name Type Range Default Integer {CHANnel1|CHANnel2|CHANnel3|CHANnel4} CHANnel1 Description Can only be triggered for analog channels Return format The query returns CHAN1, CHAN2, CHAN3, or CHAN4.