For example, :TRIGger:SLOPe:TIME 0.000003 /*Set the time value to 3μs*/ :TRIGger:SLOPe:TIME? /*The query returns 3.000000e-06*/ :TRIGgerSLOPe:WINDow For example, :TRIGger:SLOPe:WINDow TB /*Set vertical window type to TB*/ :TRIGger:SLOPe:WINDow? /*The query returns TB*/ :TRIGger:SLOPe:ALEVel For example, :TRIGger:SLOPe:ALEVel 0.16 /*Set the trigger level to 160mV*/ :TRIGger:SLOPe:ALEVel? /*The query returns 1.600000e-01*/ :TRIGger:VIDeo :TRIGger:VIDeo:SOURce 73 / 136 Description This command applies a trigger condition. Return format The query returns the time value in scientific notation. Command format :TRIGger:SLOPe:WINDow :TRIGger:SLOPe:WINDow?
Function description Sets or queries the vertical window type triggered by the slope. Parameter Name Type Range Default Discrete {TA|TB|TAB} TA Description TA: Adjust only the upper trigger level. Please refer to the: TRIGger: SLOPe: ALEVel command. TB: Adjust only the lower limit of the trigger level. Please refer to the: TRIGger: SLOPe: BLEVel command. TAB: Adjust the upper and lower trigger levels simultaneously. Return format The query returns TA, TB, or TAB. Command format :TRIGger:SLOPe:ALEVel :TRIGger:SLOPe:ALEVel? Function description Set or query the upper limit of the trigger level when the slope triggers. The unit is the same as the current amplitude unit.
Parameter Name Type Range Default Integer (-5 × VerticalScale - OFFSet) to (5 × VerticalScale - OFFSet) 2V Description This setting command is valid only when the selected source is an analog channel. Return format The query returns the trigger level in scientific notation. Command format :TRIGger:VIDeo:SOURce :TRIGger:VIDeo:SOURce? Function description Select or query the trigger source of the video trigger. Parameter Name Type Range Default