For example, :TRIGger:SHOLd:TYPe SETHOLd /*Set the hold type to establish hold*/ :TRIGger:SHOLd:TYPe? /*The query returns SETHOL*/ :TRIGger:SHOLd:STIMe For example, :TRIGger:SHOLd: STIMe 0.002 /*Set the setup time to 2ms*/ :TRIGger:SHOLd: STIMe? /*The query returns 2.000000e-03*/ Related commands :TRIGger:SHOLd:HTIMe :TRIGger:SHOLd:HTIMe For example, :TRIGger:SHOLd:HTIMe 0.002 /*et the hold time to 2ms*/ :TRIGger:SHOLd:HTIMe? /*The query returns 2.000000e-03*/ :TRIGger:SHOLd::WHEN 86 / 136 Command format :TRIGger:SHOLd:STIMe :TRIGger:SHOLd:STIMe? Function description Set or query the setup time of the setup hold trigger. The default unit is s.
Parameter Name Type Range Default Integer 8ns to 1s 1μs Description Settling time is the time that the data remains stable and unchanged before the clock signal of the flip-flop arrives. Return format The query returns the establishment time value in scientific notation. Command format :TRIGger:SHOLd:HTIMe :TRIGger:SHOLd:HTIMe? Function description Set or query the hold time of the hold trigger. The default unit is s. Parameter Name Type Range Default Integer 8ns to 1s 1μs Description The hold time is the time that the data remains stable and unchanged after the clock signal of the flip-flop arrives. This command is applicable to the hold type (refer to the: TRIGger: SHOLd:
TYPe command) as HOLd or SETHOLd. Command format :TRIGger:RUNT:WHEN :TRIGger:RUNT:WHEN? Function description Sets or queries the qualifier of the runt trigger. Parameter Name Type Range Default Discrete {NONE|GREater|LESS|GLESs} NONE Description EQUAl = (equal to time value): Only when the positive or negative pulse width of the input signal is equal to the set pulse width can it trigger. [Pulse width error is 5%] NEQUal! = (Not equal to time value): Only when the positive or negative pulse width of the input signal is not equal to the set pulse width, can the [pulse width error be 5%] be triggered.