Scanner Basics > Buttons and Lights on the Control Panel > Error Indicators Related Information & “Error Indicators” on page 23 & “Scanning Different Sizes or Types of Originals One by One (Automatic Feeding Mode)” on page 98 Error Indicators Scanner errors 23 D Automatic Feeding Mode light The scanner is in Automatic Feeding Mode. Scanning starts when an original is placed in the input tray. E Ready light On: The scanner is ready to be used. Flashing: The scanner is scanning, waiting to scan, processing, or sleeping. Of:f The scanner cannot be used because the power is off or an error has occurred. F Skip double feed detection light This is on when skipping double feed detection is enabled.
G Slow mode light This is on during slow mode. Indicators Situation Solutions Flashing slowly A paper jam or double feed occurred. Open the scanner cover, and then re- move jammed originals. Close the cov- er to release the error. Load the origi- nals again. On The scanner cover is opened. Close the scanner cover. Flashing fast Flashing fast Flashing fast Flashing fast A fatal error has occurred. Turn the power of fand on again. If the error continues to occur, contact your local dealer. On On On On Off On On The scanner has started in recovery mode because the frimware update failed. Follow the steps below to try to up- date the frimware again. 1.
Connect the computer and the scan- ner with a USB cable. (During recovery mode, you cannot update the frim- ware over a network connection.) 2. Visit your local Epson website for fur- ther instructions.