User Manual Type Vectors Dots Vectors fill up the space between adjacent sample points in the display; Dots only displays the sample points. Waveform Intensity Adjustable, Turn the multi-functional knob to adjust. Dotted line Off only displays the horizontal and vertical coordinates at the center Grid Real line graticule on the screen. Grid Intensity Adjustable, Turn the multi-functional knob to adjust. OFF Screen Brightness Adjustable, Turn the multi-functional knob to adjust. OFF Persist 1s, 5s, 10s,30s Infinite Sets the time length to display each displayed sample point. 2.14. Utility System Push the UTILITY button to display the Utility Menu as follows.
Language Set the language Sound Set the buzzer. Update Insert a USB disk with upgrade program. Press the Update Program button and the Software Upgrade window pops up. Refer to tips to upgrade or cancel. Pass/Fail Pass/Fail function. System Info Display the software and hardware versions, serial number and some other information about the oscilloscope. Calibrate Press this option and the Self Calibration dialog pops up. Refer to tips to perform the self Front Panel Self Test Test the function of all keys and knobs on the front panel. calibration or cancel. Legal Information Display source code license. 2.14.1.
Update Firmware This series of oscilloscope can upgrade the software by the USB flash disc, which needs about 5 minutes. The firmware is upgraded by the following steps: 1. Plug the USB flash disc in which a firmware program is saved in USB Host interface on the front panel of the oscilloscope. 2. Press [Utility] button to skip to the Utility menu. 3. Press Update -> Update Firmware softkey. 4. Select the file and press Multifunctional Knob to confirm. Then press Start updating softkey to update the firmware. 5. Reboot the machine after finishing upgrading, and the software version is upgraded. The oscilloscope should be self-corrected once after upgrading. 2.14.2.
Self Calibration 49 / 67 Options Comments