DVP-15MC Series Motion Controller Operation Manual 3.2 Electrical Specifications Electrical specification _3 Electrical specification for input points Electrical specification for output points 3-6 Item Content Power voltage 24 VDC（-15% ~ +20%） Fuse capacity 3 A/30 VDC, Polyswitch Isolation voltage 500 VDC（Secondary-PE） Consumption 8W Max power Standard: IEC61131-2,IEC 68-2-6 （TEST Fc）/IEC61131-2 & IEC 68-2-27 （TEST Vibration/shock immunity Ea） Static electricity: 8KV Air Discharge, 4KV Contact Discharge EFT: Power Line: ±2KV, Digital Input: ±1KV, Interference Communication I/O: ±1KV immunity RS: 80MHz ~ 1000MHz, 10V/m. Conducted Susceptibility Test: 150kHz ~ 80MHz, 3V/m Surge Test:
Power line 0.5KV DM/CM Work: 0°C ~ 55°C (Temperature), 5 ~ 95% (Humidity), pollution level 2 Environment Storage: -25°C ~ 70°C (Temperature), 5 ~ 95% (Humidity). Weight About 425g Item Content Number of input 16 channels channels Channel type High-speed digital input type for the 16 channels Input terminals Terminal I0~I7，I10~I17 Common terminal Terminal S0/S1 for input points Input type Sink or Source mode Input delay 2.5µS （OFF ->ON）, 5 µS （ON -> OFF） Input current 24 VDC, 5mA The shielded cable: 500m； Max. cable length The unshielded cable:
300m Item Content Number of output 8 transistors for output (N-MOS) channels High-speed digital output type for 8 channels Channel type Terminal Q0~Q7 Output terminals Common terminal Terminal UP/ZP (Used for connection of anode or cathode of supply power) for output points 24 VDC（-15% ~ +20%）#1 Power voltage for output points Output delay 2µS （ OFF -> ON）, 3µS （ ON -> OFF） Max. switch 1KHZ frequency