Chapter 5 Installation 5.1.4 Connecting to the Right-side Extension Module Connection of DVP-15MC series motion controller and DVP16SP11T Pull open the extension module clips on the top right and bottom right of DVP-15MC series motion controller and install DVP16SP11T along four mounting holes in the four angles of DVP-15MC series motion controller as step 1 in figure 5.1.4.1.
Press the clips on the upper right and bottom right of DVP-15MC series motion controller to fix the module tightly and ensure that their contact is normal as step 2 in figure 5.1.4.1 2 C A N R U N 0 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 17 0 7 1 5 2 Figure 5.1.4.1 Installing DVP-15MC series motion controller and DVP16SP11T in DIN Rail Use standard 35mm DIN rail. Pull open DIN rail clips of DVP-15MC series motion controller and DVP16SP11T and then insert the two modules into DIN rail. Press the DIN rail clips into DVP-15MC series motion controller and DVP16SP11T to fix the two modules in DIN rail as figure 5.1.4.2. 5-5 E R R1 ER RU RN2 1 0 01 1 0 0 1 1 21 31 415 16 0 20 30 40 50 6