DVP-ES3 Series Programming Manual Series Operation Manual. 19. Email settings SM1113, SM1116-SM1155 _2 If the sending an email fails, the flag of the email service error SM1113 is ON. The following table lists the triggers for sending email and the corresponding flags (SM1116–SM1155). 20. Flags and registers concerning data exchange Flags for data exchange through COM1 connections Flags for data exchange through COM2 connections 2-92 Item Function Trigger 1 Trigger 2 Trigger 3 Trigger 4 Email service SM1116 SM1126 SM1136 SM1146 ON: enabled, OFF: disabled Email sending SM1117 SM1127 SM1137 SM1147 ON: sending email now, OFF:
email sent Emails sent successfully SM1119 SM1129 SM1139 SM1149 ON: email sent successfully Email sending error 1 SM1120 SM1130 SM1140 SM1150 The email cannot be sent due to email content error SMTP response timeout SM1122 SM1132 SM1142 SM1152 After sending the email, the SMTP server response timeout. SMTP server response error SM1123 SM1133 SM1143 SM1153 After sending the email, the SMTP server response error. Email sending error 2 of SM1124 SM1134 SM1144 SM1154 After sending the email, the size of the attachment exceeds the limit. Email sending Error 3 SM1125 SM1135 SM1145 SM1155 After sending the email, the attachment is not found, SM1125 is ON.
SM Type Function SM750 R/W Data exchange through COM1 enabled by ISPSoft. SM752–SM783 R/W Connection 1–32 through COM1 for data exchange started. SM784–SM815 R Data received through COM 1 connection 1–32 for data exchange. SM816–SM847 R Error in the COM1 connection 1–32 for data exchange. SM Type Function