Chapter 3 Instruction Tables 3_ 3-51 Instruction code Pulse Classification API Function 16-bit 32-bit instruction 0217 SCLP DSCLP Parameter type of scale value operation 2209 SCONF – Setting TCP/UDP socket parameters 1204 SEGD – Seven-segment decoding 1704 SEGL – – Seven-segment display with latches 1200 SER DSER Searching the data 2501 SFCPSE – – Causing SFC to pause 2500 SFCRUN – – Enabling SFC 2502 SFCSTP – – Stopping SFC 1107 SFDEL – Deleting the data from the data list 1108 SFINS – Inserting the data into the data list 1111 SFL DSFL Shifting the values of the bits in the registers by n bits to the left 1106 SFPO – Reading the latest data from the data list 1110 SFR DSFR Shifting the values of the bits in the registers by n bits to the right 1105 SFRD – Shifting the data and reading it from the word device 1101 SFTL – Shifting the states of the devices to the left 1100 SFTR – Shifting the states of the devices to the right 1104 SFWR – Shifting the data and writing it into the word device 0309 SMOV – Transferring the digits 2122 SPLIT – Splitting a string 2200 SOPEN – Opening the socket 1205 SORT DSORT Sorting the data 1511 SQR DSQR Square root of a binary number 2201 SSEND – Sending the data through the socket 0702 STMR – – Special timer 1201 SUM DSUM Number of bits whose states are ON 0308 SWAP DSWAP Exchange the high byte with the low byte T 1603 T- – Subtracting a time 1602 T+ – Adding a time 1605 TCMP – Comparing a time 2401 TKOFF – Disabling a cyclic task 2400 TKON – Enabling a cyclic task 1700 TKY DTKY – Ten key input 1001 TMR – – 16-bit timer (unit:
100 ms) 1002 TMRH – – 16-bit timer (unit: 1 ms) 1011 TMRM – – 16-bit timer (unit: 10 ms)