DVP-ES3 Series Programming Manual Symbol S ： Data source _6 m 1 ： Start digit to transfer from the source device m 2 ： Number of digits to transfer D ： Data destination n ： Start digit where the source data is stored in the destination device Explanation 1. This instruction allocates and combines data. The instruction transfers m 2 digits of the number starting from the m 1 th digit of the number in S to the m 2 digits of the number starting from the n th digit of the number in D . 2. The value in m 1 must be between 1–4. The value in m 2 must be between 1– m 1 . The value in n must be between m 2 –4 (the instruction treats four bits as a unit.) 3.
When SM605 is OFF, the data in S are binary-coded decimal numbers. 6-142 API Instruction code Operand Function 0309 SMOV P S, m1, m2, D, n Transferring digits in blocks Device X Y M S T C HC D FR SM SR E K 16# “$” F S m1 m2 D n BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type S m1 m2 D n Pulse instruction 16-bit instruction 32-bit instruction ES3 ES3 －