DVP-ES3 Series Programming Manual Example 1. When M0 is ON, the instruction specifies the timer T0, and the setting value of T0 is five seconds. 2. M20 is the off-delay contact. When M0 switches to ON, M20 is ON. Five seconds after M0 switches to OFF, M20 is OFF. 3. When M0 switches to OFF, M21 is ON for five seconds. 4. When M0 switches ON, M22 is ON for five seconds. 5. Five seconds after M0 switches to ON, M23 is ON. Five seconds after M0 switches to OFF, M23 is OFF. _6 5 seconds 5 second s 5 second s 6. When the conditional contact M0 is followed by the b contact M23, the flasher circuit passes through M21 and M22.
When M0 is switched OFF, M20, M21, and M23 are switched OFF, and T0 is reset to 0. 6-184 XM0.00 YM0.200 YM0.200 YM0.211 5 seconds 5 seconds YM0.211 YM0.222 5 seconds 5 seconds YM0.222 YM0.233 5 seconds YM0.233