DVP-ES3 Series Programming Manual Additional remarks 1. If D +1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 2. If n is less than 0, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 3. For the 16-bit instruction, if you declare the operand D in ISPSoft, the data type is ARRAY [2] of WORD/INT. 4. For the 32-Bit instruction, if you declare the operand D in ISPSoft, the data type is ARRAY [2] of DWORD/DINT. _6 6-188