Chapter 6 Applied Instructions Example 1 1. When M0 is ON and HC200 changes its current value from 99 to 100 or from 101 to 100, Y10 is reset to OFF. 2. When HC200 changes its current value from 199 to 200, the contact of HC200 is ON and Y0.11 is ON, but the output is delayed by the program scan time. 6_ Example 2 If you specify HC200 as the hardware high-speed counter of the same number, the contact of HC200 is reset to OFF when HC200 changes its current value from 999 to 1000 or from 1001 to 1000. 6-287