DVP-ES3 Series Programming Manual Symbol S ： First device where the value is shifted from D ： First device where the value is shifted to n 1 ： Length of the data to be shifted _6 n 2 ： Number of bits in a group Explanation 1. This instruction divides the states of the n 1 bit devices starting from D into groups ( n 2 bits in a group), and shifts these groups to the left. This instruction then shifts the states of the n 2 bit devices starting from S to the devices starting from D to fill the vacancy. 2. In general, the SFTLP pulse instruction is used. 3. The operand n 1 must be between 1–1024. The operand n 2 must be between 1– n 1 . Example 1 1.
When M50 switches from OFF to ON, the instruction divides the states of the sixteen bit devices starting from M0 to M15 into groups (four bits in a group), and shifts these groups to the left. 2. The shift of the states of the bit devices to the left during a scan is shown below. 6-308 API Instruction code Operand Function 1101 SFTL P S, D, n1, n2 Shifting the states of devices to the left Device X Y M S T C HC D FR SM SR E K 16# “$” F S D n1 n2 BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type S D n1 n2 Pulse instruction 16-bit instruction 32-bit instruction ES3 ES3 -